Menu Close

Tigex 50 c/w Adapter for Insulated 90 degree T-Pipe

thumbnail of Draught Stabiliser Tigex 50
Spec Sheet
thumbnail of Importance of Draught Regulators
Information Sheet
SKU: TL61550xxx Categories: ,


Tigex 50 c/w Adapter for Insulated 90 degree T-Pipe

Available Adaptor Sizes:

Tigex 50 for 180mm Insulated T

Tigex 50 for 200mm Insulated T

Tigex 50 for 250mm Insulated T

Max. chimney height: up to 14 M

Max. chimney dia./area: Ø200 mm/338 cm2132/47

In almost all heating installations, the draught created in the chimney is greater than that required by the boiler. The draught can vary from 0 up to 100 Pa during the heating season. The variations depend on differences in temperature as well as wind conditions. The consequences of an unstable draught are lower efficiency, incomplete combustion and breakdowns. A stable draught is important irrespective of whether you use oil, gas or other solid fuels.

The draught stabiliser keeps the draught constant during the entire heating season and thereby secures an optimal combustion. The draught stabiliser is also very important in ventilating condensate in the chimney. When burning wood the draught stabiliser lowers the temperature in the chimney, minimising the risk of soot fire.

The height and area of the chimney, the output of the boiler and the type of fuel used will determine the size of the draught stabiliser.

Draught Stabilizer Operational Diagram

Tigex draught stabiliser, developed and patented by SPX Tigerholm, is manufactured in stainless steel and is the market’s only draught stabiliser with a fully balanced damper. In practical terms, this means it can be fitted in almost any position (angled, vertical or horizontal). Since its market introduction in Sweden in 1994, Tigex continues to be the first choice among the HVAC installers and boiler manufacturers of the private house segment.

Additional information