Hose Kit for Fuel Transfer Pump
Part Number: P-HOSEKIT-46
KEY FEATURES:
- Prebuilt hose kit for your transfer pump
- Available with 3/4″ or 1″ Hose to suit pumps with 3/4″ or 1″ inlet/outlet
- Comes with 4.6m hose, can be cut to suit application (suction/delivery)
NOTE: PUMP SHOWN FOR ILLUSTRATION PURPOSE ONLY
Available with 3/4″ or 1″ Hose to suit pumps with 3/4″ or 1″ inlet/outlet.
Comes complete with a single length of hose, which can be cut to suit your own specific requirements (e.g. allow say 1.6 metres for the suction and 3 metres for the delivery sides of the pump)
| Hose length: 4.6 Metres | Available in either 3/4″ or 1″ ID, Cloth Reinforced Nitrile |
| Nozzle Type: Manual | Aluminium c/w brass swivel |
| Hose Tails: 4 | These are sized to fit the Hose/Pump/Nozzle/Non-return Valve |
| Jubilee Clips: 4 | Appropriately sized to fit Hose/Hose Tails |
| Non-Return Valve: 1 | The Non-return Valve and Strainer comes complete |
| Strainer: 1 | Comes integral with the Non-return Valve (500 micron) |
| PTFE Tape: 1 | Roll of PTFE tape sufficient to make all joints – 12M x 12mm x 0.075mm |